DK1DA/FreeTRX
1
0
Fork 0
Code Issues Pull requests Projects Releases 13 Packages Wiki Activity Actions
FreeTRX/MDUV380_firmware/application/include/user_interface/uiGlobals.h
Marcus Kida 13ecc08267 Layout: increase content top padding to clear the S-meter labels 
Bump DISPLAY_MAIN_CONTENT_TOP_PAD 4 -> 8 so the DMR RX talkgroup/talker (and the
FM contact / CTCSS / squelch info sharing that strip) no longer crowds the S-meter
label row. Contact moves from y=28 to y=32, leaving a clear gap below the labels.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-07-06 14:10:37 +02:00

629 lines
24 KiB
C
Raw Blame History

/*
* Copyright (C) 2019-2025 Roger Clark, VK3KYY / G4KYF
* Daniel Caujolle-Bert, F1RMB
*
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer
* in the documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. Use of this source code or binary releases for commercial purposes is strictly forbidden. This includes, without limitation,
* incorporation in a commercial product or incorporation into a product or project which allows commercial use.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifndef _OPENGD77_UIGLOBALS_H_
#define _OPENGD77_UIGLOBALS_H_
#include <stdint.h>
#include <stdbool.h>
#include <time.h>
#include <math.h>
#include "main.h"
#include "functions/settings.h"
#include "functions/codeplug.h"
#include "functions/ticks.h"
#include "functions/aprs.h"
#ifndef M_PI
#define M_PI 3.14159265358979323846
#endif
#if !defined(TWO_PI)
#define TWO_PI 6.283185307179586476925286766559
#endif
#define FEET_PER_METER 3.2808399
#define MPS_PER_KNOT 0.51444444
#define MPS_TO_KMPH 3.60
#define MPS_TO_MPH 2.23693629
#define MPH_PER_KNOT 1.15077945
#define KMPH_PER_KNOT 1.852
#define KNOT_PER_KMPH 0.53995680 //35
#define MPS_PER_KMPH 0.277778
#define MILLISECS_PER_MIN 60000L
#define MILLISECS_PER_SEC 1000L
typedef uint32_t time_t_custom; /* date/time in unix secs past 1-Jan-70 */
#define MAX_ZONE_SCAN_NUISANCE_CHANNELS 32
#define NUM_LASTHEARD_STORED 32
#if defined(PLATFORM_RD5R)
#define DISPLAY_H_EXTRA_PIXELS 0
#define DISPLAY_H_OFFSET 0
#define DISPLAY_V_EXTRA_PIXELS 0
#define DISPLAY_V_OFFSET 0
#define MENU_ENTRY_HEIGHT 10
#define SQUELCH_BAR_H 5
#define V_OFFSET 2
#define OVERRIDE_FRAME_HEIGHT 11
#define VFO_LETTER_Y_OFFSET 0
#define LH_ENTRY_V_OFFSET 1
#define DISPLAY_Y_POS_HEADER 0
#define DISPLAY_X_POS_MENU_OFFSET 0
#define DISPLAY_X_POS_MENU_TEXT_OFFSET (DISPLAY_X_POS_MENU_OFFSET + 0)
#define DISPLAY_Y_POS_MENU_START (16 + MENU_ENTRY_HEIGHT + 3)
#define DISPLAY_Y_POS_MENU_ENTRY_HIGHLIGHT (DISPLAY_Y_POS_MENU_START - 1)
#define DISPLAY_Y_POS_BAR 8
#define DISPLAY_Y_POS_CONTACT 12
#define DISPLAY_Y_POS_CONTACT_TX 28
#define DISPLAY_Y_POS_CONTACT_TX_FRAME 26
#define DISPLAY_Y_POS_CHANNEL_FIRST_LINE 24
#define DISPLAY_Y_POS_CHANNEL_SECOND_LINE 38
#define DISPLAY_Y_POS_SQUELCH_BAR 14
#define DISPLAY_Y_POS_CSS_INFO 13
#define DISPLAY_Y_POS_SQL_INFO 22
#define DISPLAY_Y_POS_TX_TIMER 12
#define DISPLAY_Y_POS_RX_FREQ 31
#define DISPLAY_Y_POS_TX_FREQ 40
#define DISPLAY_Y_POS_ZONE 40
#define DISPLAY_Y_POS_RSSI_VALUE 16
#define DISPLAY_Y_POS_RSSI_BAR 27
#define TITLE_BOX_HEIGHT 15
#elif defined(PLATFORM_MD380) || defined(PLATFORM_MDUV380) || defined(PLATFORM_RT84_DM1701)
#define DISPLAY_H_EXTRA_PIXELS 32
#define DISPLAY_H_OFFSET (DISPLAY_H_EXTRA_PIXELS / 2)
#if defined(PLATFORM_VARIANT_DM1701)
#define DISPLAY_V_EXTRA_PIXELS (64 - DISPLAY_Y_OFFSET)
#else
#define DISPLAY_V_EXTRA_PIXELS 64
#endif
#define DISPLAY_V_OFFSET (DISPLAY_V_EXTRA_PIXELS / 2)
#define MENU_ENTRY_HEIGHT 16
#define SQUELCH_BAR_H 9
#define V_OFFSET 0
#define OVERRIDE_FRAME_HEIGHT 16
#define VFO_LETTER_Y_OFFSET 8
#define LH_ENTRY_V_OFFSET 0
#define DISPLAY_Y_POS_HEADER 2
#define DISPLAY_X_POS_MENU_OFFSET 4
#define DISPLAY_X_POS_MENU_TEXT_OFFSET (DISPLAY_X_POS_MENU_OFFSET + 4)
#define DISPLAY_Y_POS_MENU_START (16 + MENU_ENTRY_HEIGHT)
#if defined(PLATFORM_VARIANT_DM1701)
#define DISPLAY_Y_POS_MENU_ENTRY_HIGHLIGHT (32 + DISPLAY_V_OFFSET - (MENU_ENTRY_HEIGHT / 2))
#else
#define DISPLAY_Y_POS_MENU_ENTRY_HIGHLIGHT (32 + DISPLAY_V_OFFSET)
#endif
#define DISPLAY_Y_POS_BAR 10
// Extra gap below the S-meter/label row before the top info strip (contact/TG,
// CTCSS/DCS, squelch). Tune this one number to adjust the padding.
#define DISPLAY_MAIN_CONTENT_TOP_PAD 8
#define DISPLAY_Y_POS_CONTACT (16 + 8 + DISPLAY_MAIN_CONTENT_TOP_PAD)
#define DISPLAY_Y_POS_CONTACT_TX (34 + DISPLAY_V_OFFSET)
#define DISPLAY_Y_POS_CONTACT_TX_FRAME (34 + DISPLAY_V_OFFSET)
#if defined(PLATFORM_VARIANT_DM1701)
#define DISPLAY_Y_POS_CHANNEL_FIRST_LINE (32 + DISPLAY_V_OFFSET - 4)
#else
#define DISPLAY_Y_POS_CHANNEL_FIRST_LINE (32 + DISPLAY_V_OFFSET)
#endif
#define DISPLAY_Y_POS_CHANNEL_SECOND_LINE (48 + 48 - DISPLAY_Y_OFFSET)
#define DISPLAY_Y_POS_SQUELCH_BAR 16
#define DISPLAY_Y_POS_CSS_INFO (16 + 8 + DISPLAY_MAIN_CONTENT_TOP_PAD)
#define DISPLAY_Y_POS_SQL_INFO (25 + 8 + DISPLAY_MAIN_CONTENT_TOP_PAD)
#define DISPLAY_Y_POS_TX_TIMER (8 + 16)
#define DISPLAY_Y_POS_RX_FREQ (40 + 40)
#define DISPLAY_Y_POS_TX_FREQ (48 + 48)
#define DISPLAY_Y_POS_ZONE (50 + DISPLAY_V_EXTRA_PIXELS)
#define DISPLAY_Y_POS_RSSI_VALUE (18 + 16)
#define DISPLAY_Y_POS_RSSI_BAR (40 + DISPLAY_V_OFFSET)
#define TITLE_BOX_HEIGHT 21
#elif defined(PLATFORM_MD2017)
#define DISPLAY_H_EXTRA_PIXELS 32
#define DISPLAY_H_OFFSET (DISPLAY_H_EXTRA_PIXELS / 2)
#define DISPLAY_V_EXTRA_PIXELS 64
#define DISPLAY_V_OFFSET (DISPLAY_V_EXTRA_PIXELS / 2)
#define MENU_ENTRY_HEIGHT 16
#define SQUELCH_BAR_H 9
#define V_OFFSET 0
#define OVERRIDE_FRAME_HEIGHT 16
#define VFO_LETTER_Y_OFFSET 8
#define LH_ENTRY_V_OFFSET 0
#define DISPLAY_Y_POS_HEADER 2
#define DISPLAY_X_POS_MENU_OFFSET 4
#define DISPLAY_X_POS_MENU_TEXT_OFFSET (DISPLAY_X_POS_MENU_OFFSET + 4)
#define DISPLAY_Y_POS_MENU_START (16 + MENU_ENTRY_HEIGHT)
#define DISPLAY_Y_POS_MENU_ENTRY_HIGHLIGHT (32 + DISPLAY_V_OFFSET)
#define DISPLAY_Y_POS_BAR 10
#define DISPLAY_Y_POS_CONTACT (16 + 8)
#define DISPLAY_Y_POS_CONTACT_TX (34 + DISPLAY_V_OFFSET)
#define DISPLAY_Y_POS_CONTACT_TX_FRAME (34 + DISPLAY_V_OFFSET)
#define DISPLAY_Y_POS_CHANNEL_FIRST_LINE (32 + DISPLAY_V_OFFSET)
#define DISPLAY_Y_POS_CHANNEL_SECOND_LINE (48 + 48)
#define DISPLAY_Y_POS_SQUELCH_BAR 16
#define DISPLAY_Y_POS_CSS_INFO (16 + 8)
#define DISPLAY_Y_POS_SQL_INFO (25 + 8)
#define DISPLAY_Y_POS_TX_TIMER (8 + 16)
#define DISPLAY_Y_POS_RX_FREQ (40 + 40)
#define DISPLAY_Y_POS_TX_FREQ (48 + 48)
#define DISPLAY_Y_POS_ZONE (50 + DISPLAY_V_EXTRA_PIXELS)
#define DISPLAY_Y_POS_RSSI_VALUE (DISPLAY_V_OFFSET - 12)
#define DISPLAY_Y_POS_RSSI_BAR (DISPLAY_V_OFFSET + 10)
#define TITLE_BOX_HEIGHT 21
#elif defined(PLATFORM_MD9600)
#define DISPLAY_H_EXTRA_PIXELS 0
#define DISPLAY_H_OFFSET 0
#define DISPLAY_V_EXTRA_PIXELS 0
#define DISPLAY_V_OFFSET 0
#define MENU_ENTRY_HEIGHT 16
#define SQUELCH_BAR_H 9
#define V_OFFSET 0
#define OVERRIDE_FRAME_HEIGHT 16
#define VFO_LETTER_Y_OFFSET 8
#define LH_ENTRY_V_OFFSET 0
#define DISPLAY_Y_POS_HEADER 2
#define DISPLAY_X_POS_MENU_OFFSET 0
#define DISPLAY_X_POS_MENU_TEXT_OFFSET (DISPLAY_X_POS_MENU_OFFSET + 0)
#define DISPLAY_Y_POS_MENU_START (16 + MENU_ENTRY_HEIGHT)
#define DISPLAY_Y_POS_MENU_ENTRY_HIGHLIGHT 32
#define DISPLAY_Y_POS_BAR 10
#define DISPLAY_Y_POS_CONTACT 16
#define DISPLAY_Y_POS_CONTACT_TX 34
#define DISPLAY_Y_POS_CONTACT_TX_FRAME 34
#define DISPLAY_Y_POS_CHANNEL_FIRST_LINE 32
#define DISPLAY_Y_POS_CHANNEL_SECOND_LINE 48
#define DISPLAY_Y_POS_SQUELCH_BAR 16
#define DISPLAY_Y_POS_CSS_INFO 16
#define DISPLAY_Y_POS_SQL_INFO 25
#define DISPLAY_Y_POS_TX_TIMER 8
#define DISPLAY_Y_POS_RX_FREQ 32
#define DISPLAY_Y_POS_TX_FREQ 48
#define DISPLAY_Y_POS_ZONE 50
#define DISPLAY_Y_POS_RSSI_VALUE 18
#define DISPLAY_Y_POS_RSSI_BAR 40
#define TITLE_BOX_HEIGHT 21
#else
#define DISPLAY_H_EXTRA_PIXELS 0
#define DISPLAY_H_OFFSET 0
#define DISPLAY_V_EXTRA_PIXELS 0
#define DISPLAY_V_OFFSET 0
#define MENU_ENTRY_HEIGHT 16
#define SQUELCH_BAR_H 9
#define V_OFFSET 0
#define OVERRIDE_FRAME_HEIGHT 16
#define VFO_LETTER_Y_OFFSET 8
#define LH_ENTRY_V_OFFSET 0
#define DISPLAY_Y_POS_HEADER 2
#define DISPLAY_X_POS_MENU_OFFSET 0
#define DISPLAY_X_POS_MENU_TEXT_OFFSET (DISPLAY_X_POS_MENU_OFFSET + 0)
#define DISPLAY_Y_POS_MENU_START (16 + MENU_ENTRY_HEIGHT)
#define DISPLAY_Y_POS_MENU_ENTRY_HIGHLIGHT 32
#define DISPLAY_Y_POS_BAR 10
#define DISPLAY_Y_POS_CONTACT 16
#define DISPLAY_Y_POS_CONTACT_TX 34
#define DISPLAY_Y_POS_CONTACT_TX_FRAME 34
#define DISPLAY_Y_POS_CHANNEL_FIRST_LINE 32
#define DISPLAY_Y_POS_CHANNEL_SECOND_LINE 48
#define DISPLAY_Y_POS_SQUELCH_BAR 16
#define DISPLAY_Y_POS_CSS_INFO 16
#define DISPLAY_Y_POS_SQL_INFO 25
#define DISPLAY_Y_POS_TX_TIMER 8
#define DISPLAY_Y_POS_RX_FREQ 32
#define DISPLAY_Y_POS_TX_FREQ 48
#define DISPLAY_Y_POS_ZONE 50
#define DISPLAY_Y_POS_RSSI_VALUE 18
#define DISPLAY_Y_POS_RSSI_BAR 40
#define TITLE_BOX_HEIGHT 21
#endif
#define MENU_HEADER_HEIGHT 14
#define FREQUENCY_X_POS /* '>Ta'*/ ((3 * 8) + 4)
#define MAX_POWER_SETTING_NUM 9
#define NUM_PC_OR_TG_DIGITS 8
#define MIN_TG_OR_PC_VALUE 1
#define MAX_TG_OR_PC_VALUE 16777215
// not partitioned address scheme
#define ALL_CALL_VALUE 16777215 // 0xFFFFFF
// partitioned address scheme
#define MIN_ALL_CALL_VALUE 16777200 // 0xFFFFF0 // min..max: 16 values
#define MAX_ALL_CALL_VALUE 16777215 // 0xFFFFFF
#define RSSI_UPDATE_COUNTER_RELOAD 200
#define FREQ_ENTER_DIGITS_MAX 12
#define MIN_ENTRIES_BEFORE_USING_SLICES 40 // Minimal number of available IDs before using slices stuff
#define ID_SLICES 14 // Number of slices in whole DMRIDs DB
#define TIMESLOT_DURATION 30
#define SCAN_SHORT_PAUSE_TIME 500 //time to wait after carrier detected to allow time for full signal detection. (CTCSS or DMR fast)
#define SCAN_DMR_DUPLEX_SLOW_MIN_DWELL_TIME (TIMESLOT_DURATION * 6) //minimum time between steps when scanning DMR Duplex in slow mode.
#define SCAN_DMR_SIMPLEX_SLOW_MIN_DWELL_TIME (TIMESLOT_DURATION * 10) //minimum time between steps when scanning DMR Simplex in slow mode. (needs extra time to capture TDMA Pulsing)
#define SCAN_DMR_DUPLEX_FAST_MIN_DWELL_TIME TIMESLOT_DURATION //minimum time between steps when scanning DMR Duplex in fast mode.
//
// Extra ms time added to dwell time, in ChannelMode screen only, introduced
// when the SPI_Flash multiple read/read bug (MK22) got spotted and fixed.
//
#if defined(CPU_MK22FN512VLL12)
#define SCAN_DMR_DUPLEX_FAST_EXTRA_DWELL_TIME 8
#else
#define SCAN_DMR_DUPLEX_FAST_EXTRA_DWELL_TIME 0
#endif
//
#define SCAN_DMR_SIMPLEX_FAST_MIN_DWELL_TIME (TIMESLOT_DURATION * 2) //minimum time between steps when scanning DMR Simplex in fast mode. (needs extra time to capture TDMA Pulsing)
#define SCAN_FREQ_CHANGE_SETTLING_INTERVAL 1 //Time after frequency is changed before RSSI sampling starts
#define SCAN_SKIP_CHANNEL_INTERVAL 1 //This is actually just an implicit flag value to indicate the channel should be skipped
#define CH_DETAILS_VFO_CHANNEL -1
#if defined(PLATFORM_MD380) || defined(PLATFORM_MDUV380) || defined(PLATFORM_RT84_DM1701) || defined(PLATFORM_MD2017)
#define VFO_SWEEP_NUM_SAMPLES 160
#else
#define VFO_SWEEP_NUM_SAMPLES 128
#endif
#define VFO_SWEEP_PIXELS_PER_STEP 4
#define VFO_SWEEP_GAIN_STEP 5
#define VFO_SWEEP_GAIN_MIN 0
#define VFO_SWEEP_GAIN_MAX 120
#define VFO_SWEEP_GAIN_DEFAULT 86
#define VFO_SWEEP_RSSI_NOISE_FLOOR_MIN 4
#define VFO_SWEEP_RSSI_NOISE_FLOOR_MAX 24
#define VFO_SWEEP_RSSI_NOISE_FLOOR_DEFAULT 14
#define SCREEN_LINE_BUFFER_SIZE 17 // 16 characters (for a 8 pixels font width) + NULL
#define LOCATION_TEXT_BUFFER_SIZE 32
#define OUT_OF_BAND_FALLBACK_FREQUENCY 43000000
#define SMETER_S0 -129
#define SMETER_S1 -125
#define SMETER_S2 -121
#define SMETER_S3 -117
#define SMETER_S4 -113
#define SMETER_S5 -109
#define SMETER_S6 -105
#define SMETER_S7 -101
#define SMETER_S8 -97
#define SMETER_S9 -93
#define SMETER_S9_10 -83
#define SMETER_S9_20 -73
#define SMETER_S9_30 -63
#define SMETER_S9_40 -53
#define SMETER_S9_50 -43
#define SMETER_S9_60 -33
#define DECLARE_SMETER_ARRAY(n, destWidth) \
const int n ## Width = destWidth; \
const int n ## NumUnits = (SMETER_S9_60 - SMETER_S0); \
const int n ## Divider = (n ## NumUnits / ((float)n ## Width / (float)n ## NumUnits)); \
const int n[13] = { \
(0), \
(((SMETER_S1 - SMETER_S0) * n ## NumUnits) / n ## Divider), \
(((SMETER_S2 - SMETER_S0) * n ## NumUnits) / n ## Divider), \
(((SMETER_S3 - SMETER_S0) * n ## NumUnits) / n ## Divider), \
(((SMETER_S4 - SMETER_S0) * n ## NumUnits) / n ## Divider), \
(((SMETER_S5 - SMETER_S0) * n ## NumUnits) / n ## Divider), \
(((SMETER_S6 - SMETER_S0) * n ## NumUnits) / n ## Divider), \
(((SMETER_S7 - SMETER_S0) * n ## NumUnits) / n ## Divider), \
(((SMETER_S8 - SMETER_S0) * n ## NumUnits) / n ## Divider), \
(((SMETER_S9 - SMETER_S0) * n ## NumUnits) / n ## Divider), \
(((SMETER_S9_20 - SMETER_S0) * n ## NumUnits) / n ## Divider), \
(((SMETER_S9_40 - SMETER_S0) * n ## NumUnits) / n ## Divider), \
(n ## Width) \
};
extern const int DBM_LEVELS[16];
#define MAX_DMR_ID_CONTACT_TEXT_LENGTH 51
#define RX_BEEP_UNSET 0x00
#define RX_BEEP_CARRIER_HAS_STARTED 0x01
#define RX_BEEP_CARRIER_HAS_STARTED_EXEC 0x02
#define RX_BEEP_TALKER_IDENTIFIED 0x04
#define RX_BEEP_TALKER_HAS_STARTED 0x08
#define RX_BEEP_TALKER_HAS_STARTED_EXEC 0x10
#define RX_BEEP_TALKER_HAS_ENDED 0x20
#define RX_BEEP_TALKER_HAS_ENDED_EXEC 0x40
#define RX_BEEP_CARRIER_HAS_ENDED 0x80
typedef enum
{
TXSTOP_TIMEOUT,
TXSTOP_RX_ONLY,
TXSTOP_OUT_OF_BAND
} txTerminationReason_t;
typedef enum
{
PRIVATE_CALL_NOT_IN_CALL = 0,
PRIVATE_CALL_ACCEPT,
PRIVATE_CALL,
PRIVATE_CALL_DECLINED
} privateCallState_t;
typedef enum
{
QSO_DISPLAY_IDLE,
QSO_DISPLAY_DEFAULT_SCREEN,
QSO_DISPLAY_CALLER_DATA,
QSO_DISPLAY_CALLER_DATA_UPDATE
} qsoDisplayState_t;
typedef enum
{
SCAN_STATE_SCANNING = 0,
SCAN_STATE_SHORT_PAUSED,
SCAN_STATE_PAUSED
} ScanState_t;
typedef enum
{
SCAN_TYPE_NORMAL_STEP = 0,
SCAN_TYPE_DUAL_WATCH
} ScanType_t;
typedef struct
{
uint32_t id;
char text[MAX_DMR_ID_CONTACT_TEXT_LENGTH];
} dmrIdDataStruct_t;
typedef struct LinkItem
{
struct LinkItem *prev;
uint32_t id;
uint32_t talkGroupOrPcId;
char contact[MAX_DMR_ID_CONTACT_TEXT_LENGTH];
char talkgroup[17];
char talkerAlias[32];// 4 blocks of data. 6 bytes + 7 bytes + 7 bytes + 7 bytes . plus 1 for termination some more for safety.
double locationLat;
double locationLon;
uint32_t time;// current system time when this station was heard
uint8_t receivedTS;
uint8_t dmrMode;
uint16_t rxAGCGain;
struct LinkItem *next;
} LinkItem_t;
// MessageBox
#define MESSAGEBOX_MESSAGE_LEN_MAX ((16 * 4) + 3 /* \n */ + 1 /* \0 */) // Note: 14 char line length for MESSAGEBOX_DECORATION_FRAME
#define NOTIFICATION_MESSAGE_LEN_MAX MESSAGEBOX_MESSAGE_LEN_MAX
typedef enum
{
MESSAGEBOX_TYPE_UNDEF,
MESSAGEBOX_TYPE_INFO,
MESSAGEBOX_TYPE_PIN_CODE
} messageBoxType_t;
typedef enum
{
MESSAGEBOX_DECORATION_NONE,
MESSAGEBOX_DECORATION_FRAME
} messageBoxDecoration_t;
typedef enum
{
MESSAGEBOX_BUTTONS_NONE,
MESSAGEBOX_BUTTONS_OK,
#if defined(PLATFORM_MD9600)
MESSAGEBOX_BUTTONS_ENT,
#endif
MESSAGEBOX_BUTTONS_YESNO,
MESSAGEBOX_BUTTONS_DISMISS
} messageBoxButtons_t;
typedef bool (*messageBoxValidator_t)(void); // MessageBox callback function prototype.
typedef enum
{
ALARM_TYPE_NONE,
ALARM_TYPE_CLOCK,
ALARM_TYPE_SATELLITE,
ALARM_TYPE_CANCELLED
} alarmType_t;
typedef enum
{
SATELLITE_PHASE_NONE,
SATELLITE_PHASE_BEFORE_PASS,
SATELLITE_PHASE_DURING_PASS,
SATELLITE_PHASE_AFTER_PASS
} satellitePhase_t;
typedef struct
{
uint32_t userDMRId;
uint32_t receivedPcId;
uint32_t tgBeforePcMode;
qsoDisplayState_t displayQSOState;
qsoDisplayState_t displayQSOStatePrev;
bool isDisplayingQSOData;
bool displayChannelSettings;
bool reverseRepeaterChannel;
bool reverseRepeaterVFO;
int currentSelectedChannelNumber;
int currentSelectedContactIndex;
int lastHeardCount;
int receivedPcTS;
bool dmrDisabled;
uint32_t manualOverrideDMRId;// This is a global so it will default to 0
time_t_custom dateTimeSecs;// Epoch (00:00:00 UTC, January 1, 1970)
#if defined(PLATFORM_MD9600)
bool sk2latched;
#endif
volatile uint8_t rxBeepState;
bool talkaround;
DayTime_t daytime;
DayTime_t daytimeOverridden;
uint32_t lastDistanceMillis;
uint32_t lastDistanceDisplayed;
double lastDistanceSortLocationLat;
double lastDistanceSortLocationLon;
struct
{
ticksTimer_t timer;
int dwellTime;
int direction;
int availableChannelsCount;
int nuisanceDeleteIndex;
int nuisanceDelete[MAX_ZONE_SCAN_NUISANCE_CHANNELS];
ScanState_t state;
bool active;
bool toneActive; // tone scan active flag (CTCSS/DCS)
bool refreshOnEveryStep;
bool lastIteration;
ScanType_t scanType;
int stepTimeMilliseconds;
int scanSweepCurrentFreq;
int sweepSampleIndex;
int sweepStepSizeIndex;
int sweepSampleIndexIncrement;
#if defined(PLATFORM_MD9600)
uint16_t clickDiscriminator; // Due to click sound, we need to postpone the Audio Amp status checking.
#endif
} Scan;
struct
{
uint8_t tmpDmrDestinationFilterLevel;
uint8_t tmpDmrCcTsFilterLevel;
uint8_t tmpAnalogFilterLevel;
bool tmpTxRxLockMode;
CodeplugCSSTypes_t tmpToneScanCSS;
uint8_t tmpVFONumber;
bool tmpTalkaround;
roaming_t tmpRoaming;
bool tmpAudioMute;
} QuickMenu;
struct
{
int index;
char digits[FREQ_ENTER_DIGITS_MAX];
} FreqEnter;
struct
{
uint32_t lastID;
privateCallState_t state;
} PrivateCall;
struct
{
bool inhibitInitial;
} VoicePrompts;
struct
{
messageBoxType_t type;
messageBoxDecoration_t decoration;
messageBoxButtons_t buttons;
uint8_t pinLength;
char message[MESSAGEBOX_MESSAGE_LEN_MAX]; // 3 lines max for MESSAGEBOX_TYPE_INFO type
int keyPressed;
messageBoxValidator_t validatorCallback;
} MessageBox;
struct
{
ticksTimer_t nextPeriodTimer;
bool isKeying;
uint8_t buffer[17U]; // 16 tones + final time-length
uint8_t poLen;
uint8_t poPtr;
CodeplugSignallingDTMFDurations_t durations;
bool inTone;
} DTMFContactList;
struct
{
uint32_t alarmTime;
alarmType_t alarmType;
uint32_t currentSatellite;
} SatelliteAndAlarmData;
struct
{
bool visible;
ticksTimer_t timer;
} DMRLastTalkerOnScreen;
} uiDataGlobal_t;
#if defined(PLATFORM_MDUV380) && !defined(PLATFORM_VARIANT_UV380_PLUS_10W)
extern const char *POWER_LEVELS[2][10];
#else
extern const char *POWER_LEVELS[];
#endif
extern const char *POWER_LEVEL_UNITS[];
extern const char *DMR_DESTINATION_FILTER_LEVELS[];
extern const char *DMR_CCTS_FILTER_LEVELS[];
extern const char *ANALOG_FILTER_LEVELS[];
extern uiDataGlobal_t uiDataGlobal;
extern settingsStruct_t originalNonVolatileSettings; // used to store previous settings in options edition related menus.
#if !defined(PLATFORM_GD77S)
extern aprsBeaconingSettings_t aprsSettingsCopy; // used to store previous APRS settings in options edition related menu.
#endif
extern CodeplugZone_t currentZone;
extern CodeplugRxGroup_t currentRxGroupData;
extern int lastLoadedRxGroup;
extern CodeplugContact_t currentContactData;
extern LinkItem_t *LinkHead;
extern bool PTTToggledDown;
extern uint32_t xmitErrorTimer;
#if ! defined(PLATFORM_GD77S)
#define DAYTIME_CURRENT ((uiDataGlobal.daytimeOverridden != UNDEFINED) ? uiDataGlobal.daytimeOverridden : uiDataGlobal.daytime)
extern ticksTimer_t autolockTimer;
#endif
extern const uint32_t DMRID_HEADER_LENGTH;
extern const uint32_t DMRID_MEMORY_LOCATION_1;
extern const uint32_t DMRID_MEMORY_LOCATION_2;
extern uint32_t dmrIDDatabaseMemoryLocation2;
#endif
Reference in a new issue View git blame Copy permalink